Table of Contents
Advertisement
3-16
Chapter 3 - Key Station Features, Operation, and Programming
R E S O UR C E
11. LOUD BELL
Loudbell ID
Trunk Route
12. DSS ALLOCATION
DSS Unit # 1 -12
DSS Owner
DSS Number
13. RMT X_RATE
14. CIL X_RATE
Table 3-4: Resource Programming Table
Range
1-2
Y/N
Any valid station
Any valid station
110-19200
110-19200
Default
There are 2 loudbell interface ports.
N
Any or all of the CO line groups can be
programmed to ring either of the loudbell
por ts.
Up to 12 DSS units can be installed.
Null
The owner must be connected to the
system and can not be an existing DSS
directory number.
Null
The DSS must be connected to the system
and cannot be the same directory number
as an existing station or DSS.
9600
The RMT rate is used in setting the baud
rate for the RMP programming or the ICLID.
9600
The CIL rate is used for the SMDR port.
Programmi ng
Description
Advertisement
Table of Contents
