Table of Contents
Advertisement
3-66
Chapter 3 - Key Station Features, Operation, and Programming
The specification for this feature is that the system will display its LINE RINGING message
as normally implemented and alter that display to the calling number/name if the
information is made present on the line. This will allow the normal operation of the
system when ICLID information is not presented or the device which intercepts it and
provides the information to the KSU is missing or failed.
-or-
If the calling name is available, the display will be shown as above where "X" represents
the internal table storage of the calling name. Note that the CO delivery of the calling
name is 15-characters. If the CO delivers a name, it will be positioned left justified in the
15-character field on the display. If no name is available, the delivered number will be left
justified in the display, as shown for the "N"s.
For example, Executive Key Telephones will display the number or name (if programmed)
of the internal station that is calling. In addition, transfer recalling lines and forwarded
calls will display the original destination station's identity:
At an Executive Key Telephone, place an intercom call to station xxx. As ringback tone
is heard, the following display is seen:
At the Executive Key Telephone receiving this intercom call, the following message is
displayed (internal ring, the calling party's number "nn" is displayed):
Or when a station User Name is programmed for the calling/called station that name
will appear in the display as follows:
00 0000011 11111
12 3456789 0123456
NN NN N NN NN N NN N
XX X XX XX X XX X XX XX
CALL ING STA
STA xxx CALLIN G
TOM CALL ING
C al ler Identific ati on (IC LID)
xxx
Advertisement
Table of Contents
