STARPLUS DHS-L Technical Manual page 78

3-8
Chapter 3 - Key Station Features, Operation, and Programming
S T A T I O N
16.
ECF OPERATION
17.
SMDR OUTPUT
18.
PORT TYPE
19.
DIR. NO. SWAPPING
Swap With
20.
LINE ASSIGNMENT
Show Module
Show Slot
Port 1 - Port 8
21.
RECEIVE ASSIGNMENT
Show Module
Show Slot
Port 1 - Port 8
22.
DSS UNIT 1
23.
DSS UNIT 2
24.
DSS UNIT 3
25.
DSS UNIT 4
Table 3-1: Station Programming Table
Range Default
Y/ N N
Y/ N Y
STA/VM/VA STA
-- --
Each station can have access to specific line/s on the system or all lines for
outgoing calls.
1 1
3-12 --
TNT1-TNT6 TNT1
Y/ N Y
Each station can be set to receive incoming call indications for every line on the
system or a specific line(s).
1 1
3-12 -
TNT1-TNT6 TNT1
Y/ N Y
Any valid sta Null
Any valid sta Null
Any valid sta Null
Any valid sta Null
Desc ription
Allows station to set External Call Forward.
Allows the station to generate a call record
for each call.
Por t type can be either an extension voice
mail or voice announce.
Each station por t has an assigned extension.
The extension number may be exchanged
(swapped) with any other station port.
Enter number station is to be changed to.
Always 1
Enter the slot the desired CO card is in.
Por t indicates access for port of line card. TNT
indicates tenant group that CO line is
assigned to.
Always 1
Enter the slot the desired CO card is in.
Por t indicates access for port of line card. TNT
indicates tenant group that CO line is
assigned to.
Up to 4 DSS units may be assigned to a
specific station.
Up to 4 DSS units may be assigned to a
specific station.
Up to 4 DSS units may be assigned to a
specific station.
Up to 4 DSS units may be assigned to a
specific station.
Programmi ng