Table of Contents
Advertisement
Message Wai ting
1. Press [msg].
2. Press [call me]. You will hear confirmation tone.
To answer a single Message Waiting:
1. Your telephone display shows the following and the Message Waiting lamp (if a
button is programmed) will flash:
2. Press [reply] to answer the message or [del] to delete the message without replying.
To answer multiple Message Waitings:
1. Your telephone display shows the following:
2. Press [more] to review the other messages.
To cancel all Message Waiting indications left at your station:
1. Press [FEAT ].
2. Dial [
To cancel a Message Waiting left at another station:
1. Press [FEAT ].
2. Dial [
Conditions
The system will allow a total of 48 message waitings in the system at any one time.
At Executive Key telephones, the message waiting indication (MWI) will not be
removed until [reply] or [delete] is pressed.
Each station can leave only one message waiting at any one station; for example,
Station (A) cannot leave 2 message waitings at Station (B).
Each station may receive message waiting indications from more than one station.
A feature button must be assigned on Enhanced models to receive visual MWI.
Multiple messages are retrieved in the order that they were left.
MES SAG E TY P E
ca ll
me
MSG
TO
MSG FR OM S TA
r eply
MSG FR OM S TA
mo r e
] + [9] + [6].
✳
] + [#] + [9] + (station number).
✳
Chapt er 3 - Key Station Features, Opera tion, and Programming
pr epr o g
STA
xxx
n n
d e l
xxx
r eply
d el
3-111
Advertisement
Table of Contents
