ADTRAN NetVanta Unified Communications User Manual page 168

Using Database Elements
To specify a source and fields for the Add Data element
1. Select a data source from the Source list.
2. Select the Add button to add a Field Assignment to the list.
3. Select the Field column to obtain a drop-down list of fields in the data source.
4. Select a field from the list.
5. Select the New Value column to specify a value for the field.
6. Type a value, or select the value selector arrow in the blank new value box.
7. Select anywhere outside the new value box.
8. Repeat steps 2 to 7 to add more fields to the Field Assignments list.
To delete a field assignment for the Add Data element
1. Right-click the Field column of the field assignment that you want to delete.
2. Press Delete.
Delete Data element
The Delete Data element allows callers to delete data in a specified data source.
If some rows are deleted successfully, the caller exits the Source connector pin. If no rows are deleted, the
caller exits the No rows deleted connector pin. If any other condition exists, the caller exits the Otherwise
connector pin. For information about specifying data sources, filter fields, and values, refer to
Data Source Selector on page
For security reasons, when including a Delete Data element in a service, you might
want to put a Verify Password element before it. Make sure that you specify exactly the
data that you want to make available for deletion. For example, if you do not include a
filter field and value, all rows are deleted.
168
Delete Data element
159.
Copyright © 2009 ADTRAN, Inc.
Enterprise Communications Server
Using the
619510003-1A