ADTRAN NetVanta Unified Communications User Manual page 119

Enterprise Communications Server
You do not need to specify the mailbox from which messages are sent. Your system administrator does
this, so that messages for your extension are stored in your mailbox and delivered from there.To specify
phone numbers for the Deliver Messages element
1. Select the telephone icon.
2. In the Enter Phone Number dialog box, type a phone number in the Telephone number box.
You can also enter a phone number by right-clicking inside the Call box and selecting
New.
3. If you want to specify an account code, enable the Use account code check box and type an account
code in the box.
4. Select OK. The target number appears in the Call Number(s) list. The UC server calls the target
number when it attempts to deliver messages.
5. Repeat steps 1 to 3 to add more target numbers to the list. The UC server calls each number in the list,
according to the order you specify, until the call is answered.
Refer to
a dynamic value for the element.
To change the sequence of target phone numbers listed for Deliver Messages
1. Select the number whose ranking you want to change.
2. Select an arrow to move the number up or down in the list.
Up and down arrows
619510003-1A
Deliver Messages
element
Selecting values within elements using the value selector on page 108
Copyright © 2009 ADTRAN, Inc.
Using Standard Elements
to select
119