ADTRAN NetVanta Unified Communications User Manual page 136

Using Advanced Elements
To set Take Message specifications
Enable any of the following check boxes:
• Stop when key pressed—callers proceed to the next element after they press a key
• Beep before recording
• Review message menu
Advanced Menu element
The Advanced Menu element allows callers to make a selection using the telephone keypad. It is advisable
to put an audio element (such as Play Announcement) that specifies menu options before the Advanced
Menu element. The Advanced Menu element can also be attached to the "on single digit" connection of
certain elements.
Some callers might not make a selection from the menu.
For this purpose, the No key in check box is provided. Select the check box and then type in a number of
seconds to wait in the associated text box. You can specify the amount of time the UC server waits for a
response before it moves to the next element.
To allow callers to move to the next element if they do not select a key
1. Enable the No key in check box.
2. In the text box, type the number of seconds to wait.
To set selection keys on a menu
1. In the first On list box, select the number of the key that you want. The number one appears by
default. When callers press a key, they are sent to the element that is adjacent to the connector pin,
depending on their choice.
2. Select New to add an On list box for setting an additional key. The UC server enters the keys in
numerical sequence. You can also select a key from the list. You can set a maximum of 12 keys. Keys
range from one to nine, then include zero, * and #.
When you have finished setting selection keys, you can connect the subsequent element for each selection
key that you set, as applicable.
136
Advanced Menu
element
Copyright © 2009 ADTRAN, Inc.
Enterprise Communications Server
619510003-1A