Requirements; Starting The Application; First-Time Access Using The Desktop - ADTRAN NetVanta Unified Communications User Manual

Requirements

Requirements

Before proceeding, you need to get the following information from your network administrator:
• The name of the server to which to connect
• The UC Server access number
• Your default password for performing mailbox management
• The system-defined key used to perform remote mailbox management

Starting the Application

The application might already be installed on your computer. If it is not, ask your network administrator for
assistance, or refer to Appendix B in this manual for instructions about how to do the installation.
To start the application
1. Select Windows Start > Programs.
2. Select NetVanta UC client.
3. Select UC Client and the Choose UC Server dialog box opens.
4. Type the UC Server name in the Server name text box.
5. Enable the Save server as default check box, and then select OK. In the Server login dialog box,
type your user name and password. From now on, the application remembers the server name so that
you do not have to enter it again. When you start the application for the first time, the First-time
Access Wizard Welcome menu appears.

First-time Access using the Desktop

If you change your password using the telephone and want to change it again in the
application, you must restart the application to synchronize the password.
The First-time Access Wizard guides you through the following procedures:
• Changing your password
• Recording your greetings
If you are an IMAP user, you can also configure your IMAP user name and password. If you are not an
Exchange user, the wizard allows you to change the contact system if it finds more than one compatible
10 Copyright © 2009 ADTRAN, Inc.
Enterprise Communications Server
619510003-1A