Connecting External Devices - Fujitsu PRIMERGY BX600 S2 Operating Manual

Installing the Hardware
Ê Insert the server blades into their slots (see
to the Basic Unit" on page
to the basic unit (see
and section "Replacing the Fan Unit" on page
You remove the basic unit by following the above steps in reverse order:
V
CAUTION!
Please note the relevant safety instructions in
in the Rack" on page
Ê Note the slot assignment of the server blades so that you can insert them
correctly again after you have removed the basic unit from the rack.
Ê Remove server blades, fan units and power supplies from the basic unit to
reduce weight.
Ê Remove the four knurled screws.
Ê Pull out the basic unit and carefully remove it from the rack.
4.4

Connecting External Devices

The external connectors of the PRIMERGY BX600 S2 basic unit are located on
the rear of the basic unit. The external connectors of the server blades are
located on the front of the basic unit. For information on these connectors see
the operating manuals of the different server blade types (see
tions" on page 165).
PRIMERGY BX600 S2 Basic Unit
76). Return the power supply units and fan units
section "Replacing a Power Supply Unit" on page 142
28.
Connecting External Devices
section "Adding a Server Blade
151).
section "Notes on Installing
"Related Publica-
41