Fujitsu PRIMERGY BX600 S2 Operating Manual page 95

Ethernet Switch Blades
Figure 49: Removing the dummy module (a = green touch point)
Ê Remove the dummy module from the slot (2).
V
CAUTION!
Keep the dummy module for future use. If you remove the LAN switch
blade and do not replace it with a new one, you must reinstall the dummy
module.
Installation is the same as for the LAN switch blade (see
Switch Blade" on page
Inserting the LAN Switch Blade
V
CAUTION!
Read the safety information and the information on handling electro-
static-sensitive components in the
static-Sensitive Devices" on page
Ê Remove the LAN switch blade from its package.
PRIMERGY BX600 S2 Basic Unit
95).
Installing a LAN Switch Blade
"Inserting the LAN
section "Components With Electro-
25.
95