FC Pass-Thru Blade
11.4
Exchanging an FC Pass-Thru Blade
V
CAUTION!
Read the safety information and the information on handling electro-
static-sensitive components in the
Electrostatic-Sensitive Devices" on page
The FC pass-thru blade must always be installed in slots and NET3
first (see
Removing the FC pass-thru blade
Figure 74: Disengaging the FC pass-thru blade
Ê Press the spring on the underside of the eject handle to unlock it.
PRIMERGY BX600 S2 Basic Unit
page
117).
Exchanging an FC Pass-Thru Blade
section "Components With
25.
121