Fujitsu PRIMERGY BX600 S2 Operating Manual page 122

Exchanging an FC Pass-Thru Blade
Figure 75: Disengaging the FC pass-thru blade
Ê Swing the eject handle (1) of the FC pass-thru blade in the direction of the
arrow until the locking mechanism disengages and the blade is ejected a few
centimeters.
Ê Remove the FC pass-thru blade from the slot (2).
The FC pass-thru blade is inserted using these instructions in reverse order.
122
2
FC Pass-Thru Blade
1
PRIMERGY BX600 S2 Basic Unit