Fujitsu PRIMERGY BX600 S2 Operating Manual page 136

Adv. KVM Blade
1 Rear ID button
If you press the ID button, the ID LED on the rear lights up. The front and
the rear ID LEDs are synchronized.
2 Rear ID/error LED (green LED)
Glows green:
Blinks green:
3 KVM connector
Supports the connection of a VGA monitor, PS2 keyboard and PS2
mouse via a special cable (see
4 LAN connection (with two integrated LAN status LEDs (see the
following items 5 and 6))
LAN port, RJ45, 10/100 Mbit/s.
5 LAN activity indicator (green LED)
Dark:
Blinks green:
6 LAN connection indicator (orange LED)
Dark:
Glows:
136
The system has been selected for identification by
pressing the front or rear ID button (LED glows).
Press one of the ID buttons to deactivate the ID LED.
Checksum error: System error.
figure 10 on page
LAN connection not active.
Active LAN connection.
No connection.
LAN connection available.
KVM Blade
43).
PRIMERGY BX600 S2 Basic Unit