Installing The Hardware; Installation Steps - Fujitsu PRIMERGY BX600 S2 Operating Manual

Installing the Hardware

4 Installing the Hardware
V
CAUTION!
Please note the safety instructions in the
page 21.
Do not expose the PRIMERGY BX600 S2 basic unit to extreme environ-
mental conditions (see
from dust, moisture, and heat.
4.1

Installation Steps

The installation steps are described in detail in the following sections of this
chapter:
Unpacking the basic unit (see
page 34).
Mounting the basic unit in the rack (see
Rack" on page 35
Cabling the basic unit (see
page 41). See also the
"Instructions on Connecting and Disconnecting Cables" on page
Connecting the basic unit to the mains voltage (see
System to the Mains" on page
PRIMERGY BX600 S2 Basic Unit
section "Technical Data" on page
section "Unpacking the Basic Unit" on
and also the layout arrangement on the order lists).
section "Connecting External Devices" on
section "Cable Routing" on page 43
46).
Installation Steps
chapter "Important Notes" on
section "Installing the System in the
section "Connecting the
15). Protect it
and the section
45.
33