Table of Contents
Advertisement
Ethernet Switch Blades
Configuration with a Combination of 2-way and 4-way Server Blades
The following figure illustrates the assignment of the switch blades to the LAN
ports of the server blades in a configuration with two 4-way server blades and
six 2-way server blades.
Switch blade 1
A B A B A B A B A B A B A B A B A B A B
Figure 47: LAN port assignment with 4-way and 2-way server blades
8.6
Installing a LAN Switch Blade
Depending on the desired configuration, the system can be upgraded with one
additional switch blade.
V
CAUTION!
Read the safety information and the information on handling electro-
static-sensitive components in the
Electrostatic-Sensitive Devices" on page
LAN switch blades must always be installed in slots NET1 and NET3
first (see
PRIMERGY BX600 S2 Basic Unit
4-way
4-way
server
server
blade 2
blade 1
page
90).
Installing a LAN Switch Blade
Switch blade 2
section "Components With
25.
93
Advertisement
Table of Contents
