Fujitsu PRIMERGY BX600 S2 Operating Manual page 80

Adding a Server Blade to the System
Figure 39: Final engaging of the locking mechanism
Ê Press the eject handles to enable the locking mechanism to engage fully.
Removing the Server Blade
The server blade is removed in the same way as the dummy module (see
"Removing the Dummy Module" on page
V
CAUTION!
Read the safety information and the information on handling electro-
static-sensitive components in the
static-Sensitive Devices" on page
When you remove the server blade and do not replace it with a new one, you
must insert a dummy module in the empty slot. Make sure that the dummy
module engages in the slot correctly.
80
76).
section "Components With Electro-
25.
PRIMERGY BX600 S2 Basic Unit
Server Blades