Fujitsu PRIMERGY BX600 S2 Operating Manual page 127

Management Blade
4 LAN active indicator (amber LED)
Lights amber: The LAN is active.
Blinks amber: Boot up power ready indicator.
5 I2C connector
Proprietary I2C (IPMI) connector for Fujitsu Siemens Computers service
applications.
6 Failure indicator (amber LED)
Dark:
Lights amber: If only one management blade is present: this blade has
Blinks amber
(2 sec.):
7 Master indicator (green LED)
Unlit:
Lights green:
Blinks green:
The following table shows the conditions of the management blades indicated
by the interaction of master indicator and failure indicator LEDs.
Management blade condition
One management blade is
installed and alive
Two management blades are
installed
One management blade is
installed and hangs up
Two management blades are
installed and both hang up
PRIMERGY BX600 S2 Basic Unit
This management blade is OK (see table below).
failed (see table below).
Management blade is running in power up mode (gener-
ating heart beat for master/slave selection).
This management blade is a slave (standby), backup of
the master management blade (see table below).
This management blade is the master, responsible for
the entire system management (see table below).
This management blade is in special mode
Master indicator
Control and Connection Panel
(green LED)
ON
ON (Master)
OFF (Slave)
ON
ON
Failure indicator
(amber LED)
OFF
OFF
ON
ON
127