Using The Ipsec Vpn Wizard For Client And Gateway Configurations; Creating Gateway-To-Gateway Vpn Tunnels With The Wizard - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

Using the IPsec VPN Wizard for Client and Gateway
Configurations
You can use the IPsec VPN Wizard to configure multiple gateway or client VPN tunnel policies.
The following section provides wizard and NETGEAR
configuration procedures for the following scenarios:
• Using the wizard to configure a VPN tunnel between two VPN gateways.
• Using the wizard to configure a VPN tunnel between a VPN gateway and a VPN client.
Configuring a VPN tunnel connection requires that all settings on both sides of the VPN tunnel
match or mirror each other precisely, which can be a daunting task. The VPN Wizard efficiently
guides you through the setup procedure with a series of questions that determine the IPsec keys
and VPN policies it sets up. The VPN Wizard also configures the settings for the network
connection: security association (SA), traffic selectors, authentication algorithm, and encryption.
The settings that are used by the VPN Wizard are based on the recommendations of the VPN
Consortium (VPNC), an organization that promotes multivendor VPN interoperability.

Creating Gateway-to-Gateway VPN Tunnels with the Wizard

Figure 5-3
To set up a gateway-to-gateway VPN tunnel using the VPN Wizard.
1. Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs display, with the IKE
Policies screen in view (see
2. Click the VPN Wizard submenu tab. The VPN Wizard screen displays (see
page 5-4, which contains some entries as an example).
Virtual Private Networking Using IPsec Connections
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Figure 5-20 on page
v1.0, April 2010
ProSaf
e VPN Client software
5-22).
Figure 5-4 on
5-3