Configuring Routing Information Protocol
Routing Information Protocol (RIP), RFC 2453, is an Interior Gateway Protocol (IGP) that is
commonly used in internal networks (LANs). RIP enables a router to exchange its routing
information automatically with other routers, to dynamically adjust its routing tables, and to adapt
to changes in the network. RIP is disabled by default.
To enable and configure RIP:
1. Select Network Configuration > Routing from the menu.
2. Click the RIP Configuration option arrow at the top right of the Routing screen. The RIP
Configuration screen displays.
Figure 3-12
3. Enter the settings as explained in
LAN Configuration
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Table 3-5 on page
v1.0, April 2010
3-28.
3-27