Configuring Universal Plug And Play - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

To edit a port triggering rule (for example, to enable the rule):
1. In the Port Triggering Rules table, click the Edit table button to the right of the port triggering
rule that you want to edit. The Edit Port Triggering Rule screen displays.
2. Modify the settings that you wish to change (see
3. Click Apply to save your changes. The modified port triggering rule is displayed in the Port
Triggering Rules table.
To display the status of the port triggering rules, click the Status option arrow at the top right of
the Port Triggering screen. A popup window appears, displaying the status of the port triggering
rules.
Figure 4-30

Configuring Universal Plug and Play

The Universal Plug and Play (UPnP) feature enables the VPN firewall to automatically discover
and configure devices when it searches the LAN and WAN.
1. Select Security > UPnP from the menu. The UPnP screen displays (see
4-23).
The UPnP Portmap Table in the lower part of the screen shows the IP addresses and other
settings of UPnP devices that have accessed the VPN firewall and that have been
automatically detected by the VPN firewall:
– Active. A Yes or No indicates if the UPnP device port that established a connection is
currently active.
– Protocol. Indicates the network protocol such as HTTP or FTP that is used by the device
to connect to the VPN firewall.
– Int. Port. Indicates if any internal ports are opened by the UPnP device.
– Ext. Port. Indicates if any external ports are opened by the UPnP device.
– IP Address. Lists the IP address of the UPnP device accessing the VPN firewall.
Firewall Protection
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
v1.0, April 2010
Table 4-11).
Figure 4-13 on page
4-51