NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 284

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Table 9-2. E-mail and Syslog Settings (continued)
Setting
Enable E-Mail Logs
Do you want logs to
be emailed to you?
Send e-mail logs by Schedule
Unit
9-8
Description (or Subfield and Description)
Select the Yes radio button to enable the VPN firewall to send logs to an email
address. Complete the fields that are shown on the right side of the screen (see
explanations later in this table).
Select the No radio button to disable the VPN firewall to send logs to an email
address, which is the default setting.
E-Mail Server The IP address or Internet name of your ISP's outgoing email
Address SMTP server.
Note: If you leave this field blank, the VPN firewall cannot send
email logs and alerts.
Return E-Mail A descriptive name of the sender for email identification
Address purposes. For example, enter SRXAlerts@company.com.
Send to E-Mail The email address to which the notifications are sent. Typically,
Address: this is the email address of an administrator.
Select one of the following radio buttons to specify SMTP server authentication:
• No Authentication. The SMTP server does not require authentication.
• Login Plain. The SMTP server requires authentication with regular login.
Specify the user name and password to be used for authentication.
• CRAM-MD5. The SMTP server requires authentication with CRAM-MD5 login.
Specify the user name and password to be used for authentication.
User name The user name for SMTP server authentication.
Password The password for SMTP server authentication.
Respond to Select the Respond to Identd from SMTP Server check box to
Identd from respond to Ident protocol messages. The Ident protocol is a
SMTP Server weak scheme to verify the sender of an email. (A common
daemon program for providing the Ident service is Identd).
Enter a schedule for sending the logs. From the Unit drop-down list, select one of
the following:
• Never. No logs are sent.
• Hourly. The logs are sent every hour.
• Daily. The logs are sent daily. Specify the time.
• Weekly. The logs are sent weekly. Specify the day and time.
Day From the Day drop-down list, select the day on which the logs
are sent.
Time From the Time drop-down list select the hour on which the logs
are sent, and then select either the a.m. or p.m. radio button.
v1.0, April 2010
Monitoring System Access and Performance