Configuring Port Triggering - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
3. Enter the settings as explained in
Table 4-10. IP/MAC Binding Settings
Setting
Email IP/MAC Violations
Do you want to
enable E-mail
Logs for IP/MAC
Binding Violation?
IP/MAC Bindings
Name
MAC Address
IP Address
Log Dropped
Packets
4. Click the Add table button. The new IP/MAC rule is added to the IP/MAC Bindings table.
5. Click Apply to save your changes.
To edit an IP/MAC binding:
1. In the IP/MAC Bindings table, click the Edit table button to the right of the IP/MAC binding
that you want to edit. The Edit IP/MAC Binding screen displays.
2. Modify the settings that you wish to change (see
3. Click Apply to save your changes. The modified IP/MAC binding is displayed in the IP/MAC
Bindings table.

Configuring Port Triggering

Port triggering allows some applications running on a LAN network to be available to external
applications that would otherwise be partially blocked by the firewall. Using the port triggering
feature requires that you know the port numbers used by the application.
4-48
Table 4-10.
Description (or Subfield and Description)
Select one of the following radio buttons:
• Yes. IP/MAC binding violations are emailed.
• No. IP/MAC binding violations are not emailed.
Note: Click the Firewall Logs & E-mail page link to ensure that emailing of logs is
enabled on the Email and Syslog screen (see
Alerts, and Syslogs" on page
A descriptive name of the binding for identification and management purposes.
The MAC address of the PC or device that is bound to the IP address.
The IP address of the PC or device that is bound to the MAC address.
To log the dropped packets, select Enable from the drop-down list. The default
setting is Disable.
v1.0, April 2010
"Activating Notification of Events,
9-5).
Table 4-10).
Firewall Protection