Qualified Web Browsers - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
3. Configure the Internet connections to your ISPs. During this phase, you connect to your
ISPs. You can also program the WAN traffic meters at this time if desired. See
the Internet Connections" on page
4. Configure the WAN mode. Select either NAT or classical routing. Select load balancing
mode, auto-rollover mode, or primary (single) WAN mode. For load balancing, you can also
select any necessary protocol bindings. See
5. Configure secondary WAN addresses on the WAN ports (optional). Configure aliases for
each WAN port. See
6. Configure dynamic DNS on the WAN ports (optional). Configure your fully qualified
domain names. See
7. Configure the WAN options (optional). You can enable each WAN port to respond to a ping,
and you can change the factory default MTU size and port speed. However, these are advanced
features and changing them is not usually required. See
Options" on page
Each of these tasks is detailed separately in this chapter.
Note: For information about how to configure the WAN meters, see
Traffic Meter" on page
The configuration of LAN, firewall, scanning, VPN, management, and monitoring features is
described in later chapters.

Qualified Web Browsers

To configure the VPN firewall, you must use a Web browser such as Microsoft Internet Explorer 6
or later, Mozilla Firefox 3 or later, or Apple Safari 3 or later with JavaScript, cookies, and SSL
enabled.
Although these web browsers are qualified for use with the VPN firewall's Web Management
Interface, SSL VPN users should choose a browser that supports JavaScript, Java, cookies, SSL,
and ActiveX to take advantage of the full suite of applications. Note that Java is required only for
the SSL VPN portal, not for the Web Management Interface.
2-2
2-7.
"Configuring Secondary WAN Addresses" on page
"Configuring Dynamic DNS" on page
2-31.
9-1.
v1.0, April 2010
"Configuring the WAN Mode" on page
2-27.
"Configuring Advanced WAN
Connecting the VPN Firewall to the Internet
"Configuring
2-16.
2-25.
"Enabling the WAN