System Log Messages; Ntp - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual

System Log Messages

This section describes log messages that belong to one of the following categories:
• Logs generated by traffic that is meant for the VPN firewall.
• Logs generated by traffic that is routed or forwarded through the VPN firewall.
• Logs generated by system daemons; the NTP daemon, the WAN daemon, and others daemons.
To select many of these logs, see
page 9-5.

NTP

This section describes log messages generated by the NTP daemon during synchronization with
the NTP server.
Table C-2. System Logs: NTP
Message
Explanation
Recommended Action None
C-2
"Activating Notification of Events, Alerts, and Syslogs" on
Nov 28 12:31:13 [SRX5308] [ntpdate] Looking Up time-f.netgear.com
Nov 28 12:31:13 [SRX5308] [ntpdate] Requesting time from time-f.netgear.com
Nov 28 12:31:14 [SRX5308] [ntpdate] adjust time server 69.25.106.19 offset
0.140254 sec
Nov 28 12:31:14 [SRX5308] [ntpdate] Synchronized time with time-f.netgear.com
Nov 28 12:31:16 [SRX5308] [ntpdate] Date and Time Before Synchronization: Tue
Nov 28 12:31:13 GMT+0530 2006
Nov 28 12:31:16 [SRX5308] [ntpdate] Date and Time After Synchronization: Tue
Nov 28 12:31:16 GMT+0530 2006
Nov 28 12:31:16 [SRX5308] [ntpdate] Next Synchronization after 2 Hours
Message 1: DNS resolution for the NTP server (time-f.netgear.com).
Message 2: Request for NTP update from the time server.
Message 3: Adjust time by re-setting system time.
Message 4: Display date and time before synchronization, that is, when
resynchronization started.
Message 5: Display the new updated date and time.
Message 6: Next synchronization will be after the specified time.
Example: In these logs the next synchronization will be after 2 hours. The
synchronization time interval is configurable via the CLI.
v1.0, April 2010
System Logs and Error Messages