Additional Wan-Related Configuration Tasks - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Table 2-8. Advanced WAN Settings (continued)
Setting
Upload/Download Settings
These settings rate-limit the traffic that is being forwarded by the VPN firewall.
WAN Connection Type
WAN Connection Speed
Upload
WAN Connection Speed
Download
5. Click Apply to save your changes.
Warning: Depending on the changes that you made, when you click Apply, the
If you want to configure the advanced settings for an additional WAN interface, select another
WAN interface and repeat these steps.

Additional WAN-Related Configuration Tasks

• If you want the ability to manage the VPN firewall remotely, enable remote management (see
"Configuring Remote Management Access" on page
NETGEAR strongly recommend that you change your password (see
and Administrator Settings" on page
• You can set up the traffic meter for each WAN, if desired. See
Meter" on page 9-1.
2-34
Description (or Subfield and Description)
From the drop-down list, select the type of connection that the VPN firewall
uses to connect to the Internet: DSL, ADLS, Cable Modem, T1, T3, or
Other.
From the drop-down list, select the maximum upload speed that is
provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can
select Custom and enter the speed in Kbps in the field below.
From the drop-down list, select the maximum download speed that is
provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can
select Custom and enter the speed in Kbps in the field below.
VPN firewall might restart, or services such as HTTP and SMTP might
restart.
8-8).
v1.0, April 2010
8-10). If you enable remote management,
"Changing Passwords
"Enabling the WAN Traffic
Connecting the VPN Firewall to the Internet