Logging In To The Vpn Firewall - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
Logging In to the VPN Firewall
To connect to the VPN firewall, your computer needs to be configured to obtain an IP address
automatically from the VPN firewall via DHCP. For instructions on how to configure your
computer for DHCP, see the
Appendix E, "Related
To connect and log in to the VPN firewall:
1. Start any of the qualified Web browsers, as explained in
page
2-2.
2. Enter https://192.168.1.1 in the address field. The NETGEAR Configuration Manager Login
screen displays in the browser.
Note: The VPN firewall factory default IP address is 192.168.1.1. If you change the
IP address, you must use the IP address that you assigned to the VPN firewall
to log in to the VPN firewall.
Figure 2-1
Connecting the VPN Firewall to the Internet
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
"Preparing Your
Documents."
v1.0, April 2010
Network" document, which you can access from
"Qualified Web Browsers" on
2-3
Advertisement
Table of Contents
Troubleshooting
