Firewall Restart; Ipsec Restart; Unicast, Multicast, And Broadcast Logs - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual

Firewall Restart

This section describes logs that are generated when the VPN firewall restarts.
Table C-6. System Logs: Firewall Restart
Message
Explanation
Recommended Action None

IPsec Restart

This section describes logs that are generated when IPsec restarts.
Table C-7. System Logs: IPsec Restart
Message
Explanation
Recommended Action None

Unicast, Multicast, and Broadcast Logs

Table C-8. System Logs: Unicast
Message
Explanation
Recommended Action None
ICMP Redirect Logs
Table C-9. System Logs: Unicast, Redirect
Message
Explanation
C-4
Jan 23 16:20:44 [SRX5308] [wand] [FW] Firewall Restarted
Log generated when the VPN firewall is restarted.
This message is logged when the VPN firewall restarts after any changes in the
configuration are applied.
Jan 23 16:20:44 [SRX5308] [wand] [IPSEC] IPSEC Restarted
Log generated when the IPsec is restarted.
This message is logged when IPsec restarts after any changes in the configuration
are applied.
Nov 24 11:52:55 [SRX5308] [kernel] UCAST IN=SELF OUT=WAN
SRC=192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
• This packet (Unicast) is sent to the device from the WAN network.
• For other settings, see
Feb 2007 22 14:36:07 [SRX5308] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
• This packet is an ICMP Redirect message sent to the router by another router.
• For other settings, see
v1.0, April 2010
Table C-1.
Table C-1.
System Logs and Error Messages