Appendix B System Logs And Error Messages; Log Message Terms; System Log Messages - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

Log Message Terms

This appendix uses the following log message terms.
Table 13. Log message terms
Term Description
[FVS336Gv3] System identifier.
[kernel] Message from the kernel.
CODE Protocol code (for example, protocol is ICMP, type 8) and CODE=0 means successful
reply.
DEST Destination IP address of the machine to which the packet is destined.
DPT Destination port.
IN Incoming interface for packet.
OUT Outgoing interface for packet.
PROTO Protocol used.
SELF Packet coming from the system only.
SPT Source port.
SRC Source IP address of machine from which the packet is coming.
TYPE Protocol type.

System Log Messages

The following sections provide information about system log messages:
• NTP
• Login and Logout
• System Startup
• Reboot
• Firewall Restart
• IPSec Restart
• Unicast, Multicast, and Broadcast Logs
• WAN Status
• Resolved DNS Names
• VPN Log Messages
• Traffic Meter Logs
System Logs and Error Messages
646