Table of Contents
Advertisement
3.6
Printing after checking output
- Sample Set -
Sample Set is available if the printer has an optional hard disk installed.
Important
• In case the hard disk fails, we recommend you to back up the hard disk data on your computer.
Sample Set
Sample Set lets you print a proof copy of a multi-set job and print the rest of the sets after
checking the proof copy. The job is stored on the printer's hard disk until all of the sets are
printed using the control panel.
Note
• To delete Sample Set jobs that have accumulated on the printer, without printing them, refer to "Control
Panel Operations" (P. 75).
Printing Using Sample Set
The following explains how to use Sample Set to print a job.
Configure Sample Set settings on your computer and then send the job to the printer. Next,
perform the required control panel operation to start printing manually.
Computer Operations
The following procedure uses Windows XP WordPad as an example.
Note
• The method for displaying the Properties dialog box varies depending on the application being used.
Refer to the documentation for the application.
1.
On the [File] menu, select [Print].
2.
Select the printer from the [Select Printer] list box, and then click [Preferences]. The
[Paper/Output] tab appears.
1 set printed
Send
Stored
Proof print
Print the rest of the sets
OK
using the control panel.
Cancel the job on the control panel.
Something wrong
with proof print.
3.6 Printing after checking output - Sample Set -
73
Advertisement
Chapters
Table of Contents
