Selecting A Recipient And Sending Your Fax - Xerox WorkCentre 7675 System Administrator Manual

Selecting a recipient and sending your fax

1. From the File menu of your program, select [Print] to display the Print dialog.
2. Check that the correct (PCL) printer is selected, and then click [Properties] to display the Properties
dialog.
3. On the Paper/Output tab, select [Fax] from the Job Type drop-down menu, then click [Setup]. The
options for Fax will now be displayed in a separate dialog.
4. Select the necessary settings on the tabs of the LAN Fax Setup dialog.
5. Click [Add From Phonebook...] to select your fax recipient from the current phonebook.
6. If your recipient is not selectable from an existing Phonebook, select [Add Fax Recipient...], enter the
required information, then click [OK].
7. Click the Help button for any additional help you might need.
8. Click [OK] when done, then [OK] to close the LAN Fax Setup dialog, and [OK] again to close the
Properties dialog.
9. Click [OK] on the Print dialog to fax your document from your desktop.
206