Configuration Report; How To Print A Configuration Report; How To Disable The Configuration Report From Printing At Power On - Xerox WorkCentre 7675 System Administrator Manual

Configuration Report

The Configuration Report details the machine software versions and network settings configured for the
machine. The Configuration Report automatically prints when the machine is rebooted or powered on. The
report can be printed at any other time by following these instructions.

How to Print a Configuration Report

NOTE: If there is no Configuration Report button the machine does not have a network controller and
is unable to be connected to the network. Contact your Xerox Sales Representative to purchase a
network controller if you wish to connect your machine over the network.
At the Machine
1. Press the [Machine Status] button.
2. Touch the [Print Reports] button.
3. Touch the [Configuration Report] button.
4. Touch [Print Selected Report], then touch [Close].

How to Disable the Configuration Report from Printing at Power On

At the Machine
1. Press the [Log In / Out] button to enter the Tools pathway.
2. On the keypad enter [admin], then [1111] or the current password. Touch the [Enter] button when
finished.
3. Touch [Machine Status], then the [Tools] tab.
4. Touch [Connectivity and Network Setup].
5. Touch [General].
6. Select [Configuration Report].
7. Select [Do Not Print Report]
8. Touch the [Save] button.
9. Touch [Log In / Out] to exit the Tools pathway.
18