Sgmii Standard - Xilinx LogiCORE 1000BASE-X User Manual

Logicore ip ethernet 1000base-x pcs/pma or sgmii v9.1
Table of Contents

Advertisement

Overview of Operation

SGMII Standard

Figure 10-2
about SGMII Standard Auto-Negotiation is provided in the following sections.
Virtex-II Pro Device
Ethernet 1000BASE-X
Ethernet
Media
Access
Controller
MDIO
CoreConnect
PowerPC
an_interrupt
The SGMII capable PHY has two distinctive sides to Auto-Negotiation.
This SGMII Auto-Negotiation function, summarized previously, leverages the 1000BASE-
X PCS/PMA Auto-Negotiation function but contains two differences.
There are no other differences and dealing with the results of Auto-Negotiation can be
handled as described previously in
Ethernet 1000BASE-X PCS/PMA or SGMII v9.1
UG155 March 24, 2008
illustrates the operation of SGMII Auto-Negotiation. Additional information
PCS/PMA or SGMII
Core
Auto-Neg Adv
SGMII
(Reg 4)
link
Link Partner Ability
Base (Reg5)
Figure 10-2: SGMII Auto-Negotiation
The PHY performs Auto-Negotiation with its link partner using the relevant Auto-
Negotiation standard for the chosen medium (BASE-T Auto-Negotiation is illustrated
in
Figure
10-2, using a twisted copper pair as its medium). This resolves the
operational speed and duplex mode with the link partner.
The PHY then passes the results of the Auto-Negotiation process with the link partner
to the Ethernet 1000BASE-X PCS/PMA or SGMII core (in SGMII mode), by leveraging
the 1000BASE-X Auto-Negotiation specification described in
Negotiation Overview," page
Negotiation across the SGMII and is the only Auto-Negotiation observed by the core.
The duration of the Link Timer of the SGMII Auto-Negotiation is shrunk from 10 ms
to 1.6 ms so that the entire Auto-Negotiation cycle is much faster. See
Configurable Link Timer," page
The information exchanged is different and now contains speed resolution in addition
to duplex mode. See
"MDIO Register 5: SGMII Auto-Negotiation Link Partner
Ability," page
140.
www.xilinx.com
SGMII capable
BASE-T PHY
SGMII side
BASE-T side
Auto-Neg Adv
Auto-Neg Adv
(Reg 4)
(Reg 4)
Link Partner Ability
Link Partner Ability
Base (Reg5)
Base (Reg5)
153. This transfers the results of the Link Partner Auto-
156.
"1000BASE-X Auto-Negotiation Overview."
Link Partner
Medium
(Twisted
Auto-Neg Adv
Copper
(Reg 4)
Pair)
Link Partner Ability
Base (Reg5)
"1000BASE-X Auto-
"Setting the
R
155

Advertisement

Table of Contents
loading

This manual is also suitable for:

Logicore ip ethernet 1000base-x pcs/pma or sgmii v9.1

Table of Contents