Network Configuration - Avaya 3641 Installation, Configuration And Administration

Part A: Avaya Voice Priority Processor
3.3

Network Configuration

The IP address and other network settings are-established via the Network Configuration
screen. This is also where you may optionally establish a hostname and enter the IP
address of the location of any software updates you may obtain from Avaya. See section 6,
the Software Maintenance section, of this document for more information about installing
software updates via TFTP.
Scroll to Network Configuration and select by pressing Enter. A screen similar to the
following appears:
Note the navigation options at the bottom of the screen. Press Enter to change a value,
ESC to exit the screen, and the arrow keys to move the cursor.
SendAll
In an IP system with multiple Avaya Voice Priority Processors, the SendAll option is
provided to speed configuration and to ensure identical settings. The S–SendAll option
allows you to send that configuration parameter to every Avaya Voice Priority Processor on
the LAN. SendAll can only be used after the IP address is established on EACH Avaya
Voice Priority Processor via the serial connection. If you anticipate identical settings
across the LAN, set just the IP address and custom hostname (if desired) for each Avaya
Voice Priority Processor using the initial serial connection. Then connect via the LAN and
use SendAll to set identical configuration options for all Avaya Voice Priority Processors.
If SendAll is to be utilized in your system, all passwords must be identical.
Do not change the password at the initial configuration if the SendAll option is desired.
Use the default password and change it globally if desired after a LAN connection is
established for all Avaya Voice Priority Processors.
If independent administration of each Avaya Voice Priority Processor is desired, the
passwords may be set at initial configuration.
20 Avaya Voice Priority Processor, Avaya 3641/3645 Wireless IP Telephone, Handset Administration Tool