Avaya Communication Manager Configuration; Configuring A Standalone Station; Configuring An Associated Station - Avaya 3641 Installation, Configuration And Administration

Part B: Avaya 3641/3645 Wireless IP Telephone
3.

Avaya Communication Manager Configuration

You can configure the Avaya 3641/3645 Wireless IP Telephone as a stand-alone station or
associate it with a desk station. When the Avaya 3641/3645 Wireless IP Telephone is
associated with a desk station, the user can make and handle calls from either the Avaya
3641/3645 Wireless IP Telephone or the desk station.
3.1

Configuring a Standalone Station

To configure an Avaya 3641/3645 Wireless IP Telephone as a stand-alone station, you
must add a station on the Avaya Communication Manager for the Avaya 3641/3645
Wireless IP Telephone.
To administer a stand-alone station on the Avaya Communication Manager for a Wireless
IP Telephone:
1. From the Avaya Communication Manager administration software, add a new station.
2. Set "Type" to "4612."
3. Administer a station security code.
4. Complete the remainder of the station form as you would for a desk station.
5. Repeat Steps 1 through 5 for each stand-alone Wireless IP Telephone.
3.2

Configuring an Associated Station

To configure an Avaya 3641/3645 Wireless IP Telephone as an associated station, you
must add a station on the Avaya Communication Manager for the Avaya 3641/3645
Wireless IP Telephone and then associate that station with a desk station.
To administer an associated station on the Avaya Communication Manager for a Wireless
IP Telephone:
1. From the Avaya Communication Manager administration software, add a new station.
2. Set "Type" to "4612."
3. Set "Security Code" to the same security code used for the extension to which this
Wireless IP Telephone will be associated (that is, the desk station). You can use a
different security code, but to make it easier for the user it is recommended that you
use the same security code as the desk station.
4. Set "Message Lamp Ext" to the extension of the associated desk station.
5. Set "Bridged Call Alerting" to "y."
6. Set "Auto Select Any Idle Appearance" to "y."
7. For Button Assignments, create bridged appearances to the line appearances on the
desk station.
8. Add additional feature buttons to unassigned buttons, if desired.
9. Repeat Steps 1 through 8 for each Wireless IP Telephone.
When making changes to feature buttons, the phone must be power-cycled.
42 Avaya Voice Priority Processor, Avaya 3641/3645 Wireless IP Telephone, Handset Administration Tool