Avaya 3641/3645 Wireless Ip Telephone Configuration; The Admin Menu - Avaya 3641 Installation, Configuration And Administration

4.

Avaya 3641/3645 Wireless IP Telephone Configuration

The Wireless IP Telephone can be automatically configured for IP address by enabling
DHCP.
Each Wireless IP Telephone may be configured for site-specific requirements by opening
the Admin menu and selecting options or entering specific information. Any settings
entered in the Admin menu must conform to system settings. Only the Wireless IP
Telephone being configured is affected by the Admin menu settings.
The Wireless IP Telephone user may select several usability options from the standby
menu, described below in the User-defined Preferences section. This information is also
provided in the end user manual.
Configuration is vastly simplified through the use of the Handset Configuration Tool. See
section C in this document for more information.
4.1

The Admin Menu

The Admin menu contains configuration options that are stored locally (on each Wireless
IP Telephone). Every Wireless IP Telephone is independent and if the default settings are
not desired, the admin options must be set in each Wireless IP Telephone requiring
different settings.
Opening the Admin menu
1. With the Wireless IP Telephone powered OFF, press and hold the START key. While
holding the START key,m press and release the END key.
2. When the Admin menu appears, release the START key.
If an admin password has been set, the display will require the user to enter the
password before opening the Admin menu. The default password is 123456. If
no password is set, the display will proceed directly into the Admin menu.
Navigation
The navigation keys just below the softkeys are used to navigate through and select menu
options. These are referred to as Nav▲, Nav▼, Nav◄, Nav►, and NavOK.
Avaya 3641/3645 Wireless IP Telephone Configuration
Issue 1, January 2007 43