Avaya 3641 Installation, Configuration And Administration page 105

Message Description
Undefined Error The system is rejecting the registration of the
Wireless IP Telephone with an unrecognized
error code.
Unknown A phrase is missing from your phintl file.
xx:yy:zz
Unreachable Dialed number does not exist.
Unsupp Transport Gatekeeper rejected registration request from
the Wireless IP Telephone.
Updating ... The Wireless IP Telephone is internally
updating its software images.
Updating Code... Wireless IP Telephone is downloading new
software into memory. The number icons at the
bottom of the display indicate which file
number is currently being downloaded. This
message also displays a progress bar. When
the progress bar fills the display line the
update operation is complete on that file.
Updating Options Appears the first time the handset is powered
on and upon restoring default settings.
Waiting... Wireless IP Telephone has attempted some
operation several times and failed, and is now
waiting for a period of time before attempting
that operation again.
Wrong Code Type The software loaded into the Wireless IP
Telephone is incorrect for this model Wireless
IP Telephone.
Wrong Set Type The set type administered on the
Communication Manager disagrees with the
set type for the Wireless IP Telephone.
(No message shown) There is no voice path.
(No message shown) Messages are left at the principal station, but
the MSG icon is not lit on the Wireless IP
Telephone.
Wireless IP Telephone Status Messages
Action
If this condition persists, contact the Avaya
system administrator.
Download new software from the Avaya site
per Software Maintenance.
Check number and try again.
Verify the gatekeeper or PBX's configuration.
Ensure the gatekeeper and PBX will support
version 2 of the H.323 protocol.
None. The Wireless IP Telephone may do this
briefly after a download. This is
informational only.
None. When the progress bar fills the display
line the update operation is complete on
that file.
Do not turn the Wireless IP Telephone off
during this operation.
No action needed. Allow handset to restart
automatically.
None. The Wireless IP Telephone is waiting
for a specified period of time before
attempting that operation again.
Verify the license type is set correctly.
If the license type is correct, replace the
software image on the TFTP server with the
software that is correct for the Wireless IP
Telephone model.
Make sure that set type 4612 is used for the
Wireless IP Telephone.
Verify that the CODEC is G.711 or
G.729a/ab.
Verify that "Message Lamp Ext" on the
station form for the Wireless IP Telephone is
set to the extension of the principal station.
Issue 1, January 2007 105