Avaya 3641 Installation, Configuration And Administration page 67

Screen 2
•
Jitter – average error or "wobble" in received packet timing, in microseconds
•
Last successful transmit data rate (LastRate)
•
Gateway type (GatewyType)
J i t t e r
L a s t R a t e
G a t e w y T y p e
Where:
•
mnemo – A mnemonic that indicates what type of gateway is being used
•
11Mb – AVPP in use and no legacy Wireless IP Telephones. This system can run at
the full speed.
Screen 3
•
Screen 3 contains a list of the APs that are heard and the following parameters from
each AP:
Indicator as to whether this is the current AP or an index into the list of other APs
heard
Last two octets of the MAC address of the AP
Channel number
Signal strength
Either the 802.11 Association ID from the current AP or a mnemonic for the
reason code indicating why the Wireless IP Telephone didn't hand off to this other
AP.
C : m m m m
1 : m m m m
2 : m m m m
3 : m m m m
Where:
•
C – Indicates the AP that the Wireless IP Telephone is currently using
•
n – Indicates an index into the list of other APs, where n is equal to 1, 2, or 3
•
mmmm – This hexadecimal number is the last 2 octets of this AP's MAC address
•
ch – Channel number the AP is configured on
•
-ss – Signal strength for the AP in dBm
•
aid – The Association ID for the currently associated AP
•
mnem – A mnemonic indicating the reason code:
Unkn – Reason unknown
Weak – Signal strength too weak
Rate – One or more basic rates not supported
n n n n n
n n n n n
m n e m o
c h - s s a i d
c h - s s m n e m
c h - s s m n e m
c h - s s m n e m
Diagnostic Tools
Issue 1, January 2007 67