Altigen MAXCS ACC 6.5 Administration Manual page 288

Chapter 20: Paging Group Configuration
Figure 1. Paging Group Configuration window
To set up a Paging Group:
1. In the Paging Group configuration window, below the Group List, click the Add
button.
2. Enter a number for the paging group in the Add New Group dialog box.
3. Check the Global Group check box if you want this group to be visible to other
gateways.
4. Click OK.
5. In the Group Information field, type in the following:
First Name and Last Name of the paging group, each with a maximum of 32
•
characters.
Password for the paging group. The default is the system password set on the
•
Number Plan tab of the System Configuration window.
Description for the paging group.
•
274
MAXCS ACC 6.5 Administration Manual