Setting An Alternate Server For Altigen Ip Phones - Altigen MAXCS ACC 6.5 Administration Manual

A dialog box opens that requires you to input the slave server's site address and
member key:
5. Input the address and member key, and click OK.

Setting an Alternate Server for AltiGen IP Phones

In a VoIP domain, you can set an alternate server to which global AltiGen IP phones will
be registered when their own server (primary server) experiences a problem that
interrupts phone service. The IP phones will register to the alternate server. This applies
to a workgroup, as well. Switchover must be enabled for the individual IP phones/groups
in Enterprise Manager (User button > Resolve tab). But before you can do this, you
must set an alternate server.
Because of its role in the domain, the domain master cannot use this feature.
Note:
This feature does not apply to extensions using IPTalk.
Note:
Make sure the alternate server has enough licenses, such as agent licenses,
Note:
station licenses, and so on.
To set an alternate server,
1. Click the Servers button, and then the Information tab.
2. In the AltiGen IP Phone Redirect panel at the bottom of the tab, check Enable
Switchover to Alternate Server.
Chapter 25: Enterprise VoIP Network Management
Rejoin
button
MAXCS ACC 6.5 Administration Manual 349