Setting Login Status For System Restart - Altigen MAXCS ACC 6.5 Administration Manual

To add extensions to a hunt group:
1. In the Huntgroup Configuration window, select the hunt group number in the Group
List. The hunt group number appears in the window title bar.
2. Click the Group Member tab.
Figure 2. Huntgroup Configuration, Group Member tab
3. Select the extension number(s) in the Not Member list. Use Ctrl+click or
Shift+click to select several extensions.
4. Click Add to move them to the Member list.
If the hunt group pilot extension is configured to Ring All Available Members,
Note:
the maximum number of members is 20. See "Setting Call Handling Options"
on page 268 for details.
To remove extension(s) from a hunt group:
1. Click the extension number(s) in the Member list.
2. Click Remove to move them to the Not Member list.

Setting Login Status for System Restart

Whenever the system is restarted, the administrator can use the drop-down list at the
bottom of the Group Member tab to:
Keep Login Status—all group members retain their original login status for that
•
group prior to restart (default setting).
All Login—all group members are automatically logged into the assigned group
•
after the system is restarted.
All Logout—all group members are logged out of the group when the system is
•
restarted.
Chapter 19: Hunt Group Configuration
MAXCS ACC 6.5 Administration Manual 263