Tone Scan - Icom IC-7600 Instruction Manual

7
SCANS

■ Tone scan

The transcever can detect subaudble tones n a
receved sgnal. By montorng a sgnal that s beng
transmtted on a repeater nput frequency, you can
determne the tone frequency requred to access the
repeater.
q Set the desred frequency or memory channel to
be checked for a tone frequency.
w Push [AM/FM] several tmes to select
mode.
e Push and hold [TONE] (MF7) for 1 sec. to select
the tone frequency screen.
r Push [Y] (F-1) or [Z] (F-2) to check the repeater
tone frequency or tone squelch frequency, respec-
tvely.
t Push [T-SCAN] (F-6) to start the tone scan.
• "SCAN" blnks whle scannng.
y When a matchng tone frequency s detected, the
tone scan pauses.
• The tone frequency s set temporarly on a memory
channel. Program the memory channel to store the
tone frequency permanently.
• The decoded tone frequency s used for the repeater
tone frequency or tone squelch frequency.
u To stop the scan, push [T-SCAN] (F-6).
• Push and hold [DEF] (F-4) for 1 sec. to select the
default frequency.
i Push [EXIT/SET] to ext tone frequency screen.
111
TONE
FM
the
DEF T-SCAN
F-4 F-6
F-1 F-2 AM/FM EXIT/SET