D Drive Gain Adjustment - Icom IC-7600 Instruction Manual

3
BASIC OPERATION

D Drive gain adjustment

The drve gan s actve for all modes, other than
SSB mode wth speech compressor OFF.
Before transmttng, montor your selected operat-
ng frequency to make sure transmttng won't cause
nterference to other statons on the same frequency.
q Push [EXIT/SET] several tmes to return to the nor-
mal screen, f necessary.
w Push [SET] (F-6), then push [LEVEL] (F-1) to
select the level set mode.
e Push [Y] (F-1) or [Z] (F-2) to select "Drve Gan"
tem.
r Push [METER] (MF2) to select the ALC meter.
t Push [PTT] (mcrophone; SSB wth [COMP] ON,
AM or FM), key down (CW) or push [TRANSMIT]
(RTTY or PSK) to transmt.
y Whle talkng nto the mcrophone, keyng down or
transmttng, rotate the man dal so that the ALC
meter readng s wthn 30% to 50% of the ALC
scale. (p. 36)
• Talk nto the mcrophone at your normal voce level.
u Release [PTT], stop keyng or push [TRANSMIT]
agan to return to receve.
i Push [EXIT/SET] to ext the dsplay set mode.
37
the
TRANSMIT METER
F-1
LEVEL /
Drive gain range
SET
F-6
Main dial
F-2 EXIT/SET