Split Frequency Operation - Icom IC-7600 Instruction Manual

■ Split frequency operation

Splt frequency operaton allows you to transmt and
receve n the same mode on two dfferent frequen-
ces. Splt frequency operaton s performed usng 2
frequences on the man and sub readouts.
The followng s an example of settng 21.290 MHz for
recevng and 21.310 MHz for transmttng.
q Set 21.290 MHz (USB) n VFO mode.
w Push [SPLIT], then push and hold [CHANGE] for 1
sec.
• The quck splt functon s much more convenent for
selectng the transmt frequency. See the next secton
for detals.
• The equalzed transmt frequency and "
appear on the LCD.
• [SPLIT] ndcator lghts.
• " " appears to show the transmt frequency read-
out.
e Whle pushng and holdng [XFC], rotate the man
dal to set the transmt frequency to 21.310 MHz.
• The transmt frequency can be montored whle push-
ng [XFC].
r Now you can receve on 21.290 MHz and transmt
on 21.310 MHz.
To change the transmt and receve frequences, push
[CHANGE] to exchange the man and sub readouts.
✔ CONVENIENT
• Direct shift frequency input
The shft frequency can be entered drectly.
q Push [F-INP ENT].
w Enter the desred shft frequency wth the dgt keys.
• 1 kHz to 9.999 MHz can be set.
• When you requre a negatve shft drecton, push
[GENE •] n advance.
e Push [SPLIT] to nput the shft frequency n the sub
readout and the splt functon s turned ON.
• Dualwatch function
The dualwatch functon s convenent for tunng the
transmt frequency whle montorng both frequences
used for transmttng and recevng.
• Split lock function (p. 129)
Accdentally releasng [XFC] whle rotatng the man
dal changes the receve frequency. To prevent ths,
use both the splt lock and dal lock functons to
change the transmt frequency only. The splt lock
functon cancels the dal lock functon whle pushng
[XFC] durng splt frequency operaton.
The splt lock functon s OFF by default, but can be
turned ON n the Others set mode.
[SPLIT] indicator
• When the split function ON
"
• When [XFC] is pushed
• The split frequency operation is ready
RECEIVE AND TRANSMIT
MAIN
/SUB
M.SCOPE M.SCOPE
SPLIT
Main dial
CHANGE
XFC
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
88