Memory Scan Operation; Select Memory Scan Operation - Icom IC-7600 Instruction Manual

7
SCANS

■ Memory scan operation

q Push [EXIT/SET] several tmes to close any mult-
functon screens, f necessary.
w Select memory mode.
e Push [SCAN] (F-5) to select the scan screen.
r Set [RF/SQL] open or closed.
• See p. 105 for squelch condton.
• If the [RF/SQL] control functon s set as "AUTO," the
squelch s always open n the SSB, CW, RTTY and
PSK modes. (pgs. 2, 33, 128)
t Push [MEMO] (F-1) to start the memory scan.
• "
scannng.
y When the scan detects a sgnal, the scan stops,
pauses or gnores t dependng on the resume set-
tng and the squelch condton.
u To cancel the scan, push [MEMO] (F-1) .
• Rotatng the man dal also cancels the scan.
2 or more memory channels must be programmed
for a memory scan to start.

■ Select memory scan operation

q Push [EXIT/SET] several tmes to close any mult-
functon screens, f necessary.
w Select memory mode.
e Push [SCAN] (F-5) to select the scan screen.
r Set [RF/SQL] open or closed.
• See p. 105 for squelch condton.
• If the [RF/SQL] control functon s set as "AUTO," the
squelch s always open n the SSB, CW, RTTY and
PSK modes. (pgs. 2, 33, 128)
t Push [MEMO] (F-1) to start the memory scan.
• "
scannng.
y P ush [SEL No.] (F-4) several tmes to select the
select scan number from ★1, ★2, ★3 and ★1,2,3.
u Push [SELECT] (F-3) to start select memory scan;
push [SELECT] (F-3) agan to return to memory
scan, f desred.
• "
"
i When the scan detects a sgnal, the scan stops,
pauses or gnores t dependng on the resume set-
tng and the squelch condton.
o To cancel the scan, push [MEMO] (F-1).
• Rotatng the man dal also cancels the scan.
2 or more memory channels must be desgnated
as select memory channels, as well as the same
select scan channel number, for select memory
scan to start.
109
" and decmal ponts blnk whle
" and decmal ponts blnk whle
" b l  n k s  n s t e a d o f
" durng a select memory scan.
[RF/SQL]
F-1 F-5
MEMO SCAN
SEL No.
F-4
[RF/SQL]
F-1 F-3
MEMO SELECT
Main dial
EXIT/SET
SCAN
F-5
Main dial
EXIT/SET