Memory Names; D EdTNg (ProgrammNg) Memory Names; Memory Clearing - Icom IC-7600 Instruction Manual

6
MEMORY OPERATION

■ Memory names

All memory channels (ncludng scan edges) can be
tagged wth alphanumerc names of up to 10 charac-
ters each.
Captal letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } ¦ _ –
@) and space can be used.
D Editing (programming) memory names
q Push [EXIT/SET] several tmes to close any mult-
functon screens, f necessary.
w Push [MEMORY] (F-4) to select memory lst screen.
e Select the desred memory channel wth [∫]/[√].
r Push [NAME] (F-4) to edt memory channel name.
• A cursor appears and blnks.
• Memory channel names of blank channels cannot be
edted.
t Input the desred character by rotatng the man
dal or by pushng the keypad for number nput.
• Push [ABC] or [abc] to toggle captal and small letters.
• Push [123] or [Symbol] to toggle numerals and sym-
bols.
• Push [Ω] (F-1) or [≈] (F-2) for cursor movement.
• Push [DEL] (F-3) to delete the selected character.
• Push [SPACE] (F-4) to nput a space.
• Pushng the transcever's keypad, [0]–[9] and [.] can
also enter numerals.
y Push [EXIT/SET] to nput and set the name.
• The cursor dsappears.
u Repeat steps e to y to program another memory
channel's name, f desred.
i Push [EXIT/SET] to ext memory lst screen.
✔ For your convenience
When a PC keyboard s connected to a [USB] (A)
connector on the front panel, the memory name can
also be edted from the keyboard.

■ Memory clearing

Any unused memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q Select memory mode wth [VFO/MEMO].
w Push [MEMORY] (F-4) to select memory lst
screen.
e Select the desred memory channel wth [∫]/[√].
r Push and hold [CLR] (F-5) for 1 sec. to clear the
contents.
• The programmed frequency, operatng mode and flter
dsappear.
t To clear other memory channels, repeat steps e
and r.
103
NAME
123 abc
MEMORY
Symbol ABC F-4
F-1 F-2 F-3 F-4
DEL SPACE
F-4 F-5
MEMORY CLR
Beep
(CLR)
F-5
Beep
Beep
Keypad
Main dial
EXIT/SET
VFO/MEMO
Push for 1 sec.