Break-N FunctOn; D Sem Break-N OperatOn; D Full Break-N OperatOn - Icom IC-7600 Instruction Manual

4
RECEIVE AND TRANSMIT
■ Break-in function
<MODE> CW
The break-n functon s used n the CW mode to
automatcally toggle the transcever between transmt
and receve when keyng. The IC-7600 s capable of
full break-n or sem break-n.
D Semi break-in operation
Durng sem break-n operaton, the transcever mme-
dately transmts when keyng, then returns to receve
after a pre-set delay tme has passed from when you
stop keyng.
q Push [CW] to select the CW or CW-R mode.
w Push [BK-IN] (MF6) once or twce to turn the sem
break-n functon ON.
• "BKIN" appears.
e Rotate [BK-IN DELAY] to set the break-n delay
tme (the delay from transmt to receve).
When usng a paddle, rotate [KEY SPEED] to
adjust the keyng speed.
D Full break-in operation
Durng full break-n operaton, the transcever mme-
dately transmts when keyng, then returns to receve
after you stop keyng.
q Push [CW] to select the CW or CW-R mode.
w Push [BK-IN] (MF6) once or twce to turn the full
break-n functon ON.
• "F-BKIN" appears.
When usng a paddle, rotate [KEY SPEED] to
adjust the keyng speed.
85
BK-IN CW
[BK-IN DELAY] [KEY SPEED]
BK-IN CW
[KEY SPEED]
Appears
Appears