Volume Setting; Meter Display Selection; D Mult-FunctOn DGTal Meter - Icom IC-7600 Instruction Manual

■ Volume setting

➥ Rotate [AF] control clockwse to ncrease the audo
output level, counterclockwse to decrease t.
Decreases

■ Meter Display selection

The transcever has 6 transmt meter functons for
your convenence.
➥ Push [METER]
(MF2)
desred meter.
Dsplays the RF output power n % (per-
cent).
Dsplays the SWR on the transmsson
lne.
Dsplays the ALC level. When the meter
movement shows the nput sgnal level
exceeds the allowable level, the ALC
lmts the RF power. In such cases,
reduce the [MIC GAIN] control.
Dsplays the compresson level when the
speech compressor s n use.
Dsplays the dran current of the fnal
amplfer MOSFETs.
Dsplays the dran termnal voltage of the
fnal amplfer MOSFETs.
D Multi-function digital meter
The IC-7600 can dsplay the mult-functon dgtal
meter on the LCD dsplay. Ths meter dsplays all
transmt parameters smultaneously.
q Push and hold [METER] (MF2) for 1 sec. to turn
the mult-functon dgtal meter ON.
w Push [P-HOLD] (F-1) to toggle the peak level hold
functon ON.
• " P-HOLD" appears on the wndow ttle when the peak
level hold functon s ON.
e Push and hold [METER] (MF2) for 1 sec., or push
[EXIT/SET] to turn the mult-functon dgtal meter
OFF.
Increases
several tmes to select the
BASIC OPERATION
[AF]
METER
Power level readout
ALC level readout
I readout
D
METER
F-1 EXIT/SET
P-HOLD
"P-HOLD" ndcator
3
SWR readout
Compression level
readout
V readout
D
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
34