D Tone Scan Operation - Icom IC-7000 Instruction Manual

D
By monitoring a signal that is being transmitted on a
repeater input frequency, you can determine the tone
frequency necessary to access a repeater.
q
During tone squelch, DTCS squelch or repeater
o p e r a t i o n ( "
displayed), select M-3.
[MENU/GRP] for 1 second once or twice
to select the menu group M.
[MENU/GRP] momentarily one or more times
to select the menu M-3.
w Hold down [F-3 TON] for 1 second to enter the
FM tone Set mode.
e Push [F-2 SCN] to toggle the tone scan operation
ON or OFF.
automatically stops, the matched tone or code is
displayed and the tone or code setting is automatically
adjusted accordingly.
r Push [Z(
MENU/GRP )] to exit the FM tone Set mode.
During tone squelch operation.
," " " o r " " i s
During DTCS squelch operation.
RECEIVE AND TRANSMIT
[MENU/GRP] [F-2] [F-3]
During repeater operation.
4
4
62