Fluke 5700A Series II Operator's Manual page 165

Table 5-1. Command Summary by Function (continued)
SP_EOF
SP_EOF?
SP_SET
SP_SET?
SP_TIME
SP_TIME?
Calibration, Testing, and Diagnostics Commands for the Calibrator
CAL_ADJ
CAL_CHK
CAL_CLST?
CAL_CONF
CAL_CONF?
CAL_CONST?
CAL_DATE?
CAL_DAYS?
CAL_INTV
CAL_INTV?
CAL_PR
CAL_REF
CAL_RNG
CAL_RPT?
CAL_SHIFT?
CAL_SLST?
CAL_STORE
CAL_TEMP
CAL_TEMP?
CAL_WBFLAT
CAL_WBGAIN
CAL_ZERO
DIAG
RS-232-C Interface Parameter Setting Commands
Sets the End-Of-File (EOF) string
Returns the End-Of-File (EOF) string
Sets baud, terminal or computer mode, stall method, data bits, stop bits, parity,
and End-Of-Line (EOL) string
Returns baud rate, terminal or computer mode, stall method, data bits, stop
bits, parity, and End-Of-Line (EOL) string
Sets the timeout period
Returns the timeout period
Does the internal portion of calibration
Starts calibration check
Returns a group of calibration constant names and their values
Sets the calibration specifications to a confidence level of either 95% or 99%.
Returns the current calibration confidence level.
Returns the value of a particular constant
Returns the date of the most recent calibration
Returns the days elapsed since last calibration recall
Sets the calibration interval
Returns the calibration interval
Prints a calibration report out the serial interface
Does a calibration procedure using a 1Ω, 10 kΩ, or 10V standard
Starts a self calibration procedure of a range
Returns a formatted calibration report
Returns the shift of a range due to a calibration action
Returns the shifts of a group of ranges
Stores new calibration constants in nonvolatile memory
Sets the temperature for calibration
Returns the calibration temperature last specified
Does Wideband AC Module (Option 5700A-03) flatness calibration
Does Wideband AC Module (Option 5700A-03) gain calibration
Does internal zeros calibration
Runs self diagnostics
Remote Operation 5
Commands
5-15