Fluke 5700A Series II Operator's Manual page 135

The 10.000208V output setting is calculated by the calibrator using the following
equation:
This is applied to 10V to yield the following:
The 1.3 mV zero offset is then subtracted:
8. Use the output adjustment controls to adjust the calibrator's output for a reading of
10.0V (the reference value) on the DMM. The displays change to:
Output Display
The Control Display now shows that the DMM scale error at 19.9V is -0.0151%, and the
DMM linearity error at 10V is +0.0352%.
−
19 9 . V 19 903 . V
1 −
19 9 . V
10V x 1.0001508 = 10.001508V
10.001508V − 0.0013V = 10.000208V
Control Display
Front Panel Operation
Setting Output Limits
= 1.0001508
UUT (DMM) Display
4
4-49